Chemical sludge is a difficult material to handle, mainly because of its complex material composition and high moisture content, making it difficult to transport and handle. Chemical sludge is also common in daily life. If chemical sludge cannot be processed in time, it will cause certain pollution to the environment, thereby affecting thesurrounding ecological environment. So what is the best way to dry chemical sludge materials? With the maturity of manufacturing technology, chemical sludge drying equipment can be used for chemical sludge drying.

The chemical sludge dryer equipment is mainly a mechanical equipment for drying chemical sludge materials. Its equipment can dry a large amount of materials containing moisture, with high drying output, good drying effect and low drying cost Etc.

The working principle of sludge dryer:

The sludge enters the guide plate in the dryer from the feeder through the chute. With the rotation of the cylinder, the sludge is sent to the inclined lifting plate, and then lifted to the center of the cylinder, and gradually falls to form a material curtain. , the high-temperature airflow passes through it, preheating the sludge and evaporating part of the water. When the sludge is spilled and moved to the movable grate-shaped wing, the preheated grate-shaped wing is mixed with the material, and the heat is transferred to the material to evaporate part of the water. At the same time, the material entrained by the wing plate is lifted and sprinkled, repeated many times, and the material exchanges heat with the hot air flow. At the same time, the cleaning device buried in the material also slides down the inner side of the arc-shaped lifting plate to clean the material adhering to the inner wall of the lifting plate. When the cleaning device rotates along the vertical line with the cylinder, it is dragged on the back of the circular arc lifting plate to clean the materials adhering to the outer wall of the lifting plate. With the continuous rotation of the cylinder, part of the water evaporates, and the sludge is further dried. At the same time, the cleaning device also played a role in breaking the sludge pellets, which improved the drying speed. Finally, the sludge was dried and turned into loose materials with low moisture, which were discharged from the discharge port.