If the temperature deviation of the chicken manure dryer occurs during the production process, this will greatly affect its work efficiency. Generally speaking, there are three main reasons for this phenomenon:

  1. The heating tube of the chicken manure dryer motor burns out, so that the mechanical heat generated by the motor cannot be discharged in time, and it is stored in the motor, causing the temperature of the motor to rise, affecting the service life and working efficiency of the motor. Stop the machine in time and replace the burnt out heating tube so that the working heat generated by the motor can be discharged in time.

  2. The motor fan blades of the chicken manure dryer are reversed, which causes the motor to show heat and the temperature continues to rise, which seriously affects the normal operation of the motor, and even burns the motor in severe cases. At this time, the power can be disconnected to change the position of the motor, make the fan rotate in the normal direction.

  3. The heating tube wire of the motor of the chicken manure dryer is burned out. The conductive wire of the heating tube is also an important component of the motor's heat dissipation. Once the capacity of the motor is exceeded, the safety device will break, which will directly cause the motor to stop working and affect the working process of the entire production line. Therefore, when placing and replacing the conductive wire of the heating tube, the staff should choose a wire of better material to ensure that the chicken manure dryer can work safely and stably.

  It is very simple to find the reason for the stability and instability of the chicken manure dryer. You can easily find it from the above three aspects. Now that we have found the reason for the high and low temperature of the dryer, we must prescribe the right medicine to solve this problem from the source, so that we will not suffer such troubles in the future. As long as the dryer reaches a suitable temperature during operation, the ideal drying effect can be achieved and work efficiency can be improved.