After the straw dryer is put into production, there are some precautions in the initial use of the equipment that everyone needs to understand. Today I will share with you.

  After the straw dryer is put into production, there will be a certain running-in period: when it is in the running-in period, it is necessary to constantly check the various components. If it is abnormal, it should be shut down in time to eliminate it. Before the cause is found and the fault is not eliminated, the operation should be stopped to end the operation. Pay attention to the workload during the break-in period. Generally, the workload during the break-in period should not exceed a certain percentage of the rated workload, and a suitable workload should be deployed to prevent the overheating caused by the machine's continuous operation for a long time. After the break-in period is over, routine maintenance of the straw dryer should be carried out, inspections and adjustments should be done, and the lubricant should be replaced. Regularly check the lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) level, and pay attention to check the tightness of the whole machine. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended that during the run-in period, the lubrication point should be filled with grease.

  The above are the precautions for the initial use of straw dryers. More information about straw dryers can be found on the official website of Zhengzhou Dingli.