Biomass charcoal-making machine uses the most advanced pyrolysis carbonization technology to convert biomass into charcoal.
Biomass pyrolysis equipment (two-layer continuous drum carbonization machine) is a process that combines coconut shells, walnut shells, apricot shells, hemp rods, sawdust, sawdust, rice husks, bamboo, eucalyptus, fungus residues, medicinal residues, furfural residues, and coffee grounds. It is special pyrolysis equipment for dry distillation and oxygen-free carbonization of carbon-containing small particle wood materials such as palm shells, peanut shells, and sunflower seed shells under high-temperature conditions pyrolysis machine.
Environmentally friendly Biomass Pyrolysis Machine, the use of carbonized flue gas purification into combustible gas generated in combustion itself, recycling to use, it can 24 hours of continuous production, has zero pollution, zero-emission, save labor, high capacity, energy-saving consumption, the advantages of the high degree of automation, advanced technology, which is suitable for large-scale production, with high carbonation rate, high carbon production rate, energy saving, environmental protection, high-efficiency advantages.
Biomass continuous drum carbonization machine is a professional equipment for continuous high-temperature heating and carbonization of biomass under the condition of no oxygen and poor oxygen. It is composed of two-layer carbonization machine, preheat wood powder burner (or gasifier, natural gas burner), combustible gas purification device, external heating furnace of carbonization machine, feeding conveyor, cooling and carbon discharging machine and control, etc In this paper. The biomass is transported into the inner drum by the conveyor. The waste heat in the furnace is used to dry and preheat the materials to 200-250 ℃. The outer drum is provided with a combustible gas recovery pipeline at the end. The combustible gases such as carbon monoxide, methane and ethane produced in the carbonization process are fully utilized to separate wood tar, wood acid solution, water and ash through the flue gas purification system The pure combustible gas is sent to the heating furnace outside the carbonization machine for full combustion and heating to the carbonization machine to achieve reciprocating cycle heating and continuous production. The carbonization temperature is generally controlled at / 700-800 ℃. The carbonized products are discharged from the carbonization machine through water cooling, and the carbonization ignition is supplied by the pre heating wood powder burner (or gasifier or natural gas burner).
